BOSCH Power LBB-1930

Harga Belum Termasuk PPN & Ongkos Kirim Luar Kota

Kontak Marketing Kami Untuk Dapatkan Harga Terbaik

Bosch – LBB1930/20 – Plena Booster / Power Amplifier

▶120 W power amplifier in a compact housing
▶70 V / 100 V and 8 ohm outputs
▶Dual inputs with priority switching
▶100 V input for slave operation on 100 V speaker line
▶Temperature controlled forced front to back ventilation, directly stackable.

The LBB 1930/20 is a powerful 120 W power amplifier in a 2U high 19” case for rack mounting or tabletop use. LEDs on the front panel show the status of the amplifier: power, audio output level, and supervised functions. This high-performance unit fulfills a wide range of public address requirements at a surprisingly low cost.

Functions
Dependability
The amplifier is protected against overload and short circuits. A temperature-controlled fan ensures high reliability at high output levels and low acoustic noise at lower output levels. An overheat protection circuit switches off the power stage and activates an LED on the front panel, if the internal temperature reaches a critical limit due to poor ventilation or overload.

Controls and indicators
Front
• Meter (LED’s for -20, -6, 0 dB and Power ON)
• Battery operation indicator
• Overheat indicator
Back
• Level control input 1
• Level control input 2
• Power button
• Mains switch

Interconnections
Back
• Priority line input 1 (XLR/balanced)
• Line loop-through 1 (XLR/balanced)
• Program line input 2 (XLR/balanced)
• Line loop-through 2 (XLR/balanced)
• Priority controlled loudspeaker output terminals
• 24 VDC power supply terminal
• Three loudspeaker direct output terminals
• Two 100 V slave input terminals
• Input 2 enable control terminal
• Input 1 priority control terminal
• Earth connection screw
• Mains socket

Technical Specifications:

Electrical

• Mains power supply :
• Voltage 230 VAC ±10%, 50/60 Hz
• Inrush current 8 AMax power consumption 400 VA
• Battery power supply
• Voltage 24 VDC +15% / -15%, Current max 6 A
• Performance :
• Output power (rms 120 Watt /maximum 180 Watt)
• Power reduction on backup power -1 dB
• Frequency response 50 Hz to 20 kHz (+1 / -3 dB at -10 dB ref. rated output)
• Distortion <1% at rated output power, 1 kHz
• S/N (flat at max volume) >90 dB

Power consumption

• Mains operation
• Max power : 274 W
• -3dB :193 W
• -6dB : 143 W
• Pilot tone* : 41 W
• Idle : 18 W
• 24 VDC operation
• Max power : 7.0 A (168 W)
• -3 dB : 6.0 A (144 W)
• -6 dB : 4.3 A (103 W)
• Pilot tone* : 0.9 A (22 W )
• Idle : 0.1 A (2.4 W)
  * 20 kHz -20dB with maximum loudspeaker load

Mechanical

• Dimensions (H x W x D) 100 x 430 x 270 mm (19″ wide, 2U high, with feet)
• Weight Approx. 10.5 kg
• Mounting Standalone, 19”rack
• Color Charcoal

Environmental

• Operating temperature -10 ºC to +55 ºC (14 ºF to +131 ºF)
• Storage temperature -40 ºC to +70 ºC (-40 ºF to +158 ºF)
• Relative humidity <95%
• Acoustic noise level of fan <48 dB SPL at 1 m (max output)